Search found 535 matches
- Sun Jan 02, 2022 8:44 am
- Forum: Prepar3D Feature Requests
- Topic: Please fix it finally
- Replies: 1
- Views: 18684
Please fix it finally
Working landing lights, which dissapeared with v5 sometime until now 5.3HF+. Aircraft lights effects are unusable now. https://i.imgur.com/1W9RoyU.jpg Lights can be seen, thats ok, but landing-,taxi and searchlights do not illuminate the ground. The rear position light is lightening the ground but n...
- Thu Dec 30, 2021 12:36 pm
- Forum: Prepar3D Installation and Installer Questions
- Topic: v5.3 Installer without Hotfix
- Replies: 10
- Views: 6958
Re: v5.3 Installer without Hotfix
Lefteris, allow me a quote: "I am noticing a strong tendency for a couple forum members here to be re-posting the same very unhelpful remarks." With all due and considerable respect, I see the same questions, that have been answered over and over again, asked in these forums, and not only...
- Sun Dec 26, 2021 4:44 am
- Forum: Other Support Questions
- Topic: P3Dv5.3 Crashing
- Replies: 3
- Views: 4527
Re: P3Dv5.3 Crashing
Hi Jerry
This can be a lot of things. I'd recommend to delete generated files and check if the problem goes away. ORBX installs sceneries pretty much automatic, so it's easy to just run Central and let it do it's job. Maybe also deleting shader cache will help.
Dan
This can be a lot of things. I'd recommend to delete generated files and check if the problem goes away. ORBX installs sceneries pretty much automatic, so it's easy to just run Central and let it do it's job. Maybe also deleting shader cache will help.
Dan
- Mon Dec 20, 2021 11:59 am
- Forum: Hardware Specific Questions
- Topic: RTX 3080
- Replies: 16
- Views: 15373
Re: RTX 3080
I tried deleting the Prepar3d.cfg but it didn't seem to make any difference. Also updated to the latest Nvidia driver, I didn't have any modifications. With the1080 I had in this computer before I was getting about 25-30 fps at addon airports like Orbx Vienna Intl. With the 3080 I'm getting about t...
- Mon Dec 20, 2021 10:04 am
- Forum: Prepar3D Client Application Questions
- Topic: After 5.3 Update: Black ATC Menu
- Replies: 5
- Views: 4326
Re: After 5.3 Update: Black ATC Menu
There was a solution ones to a similar problem here: https://www.prepar3d.com/forum/viewtopic.php?t=128612 I only had an prepar3d.cfg from 4.5 but the ATC entries were the same, so I just copied them over on the 5.3 prepar3d.cfg, saved and started the sim. To my surprise, this rather esoteric approa...
- Tue Dec 14, 2021 11:02 am
- Forum: Prepar3D Client Application Questions
- Topic: Prepar3d is running, and I can hear it, but window doesn't appear
- Replies: 5
- Views: 4023
Re: Prepar3d is running, and I can hear it, but window doesn't appear
The graphics seems not be initialized correctly. Is the GPU sufficient? (see minimal requierments)
Delete your shader cache and restart the sim (Delete the files in your C:\Users\USERNAME\AppData\Local\Lockheed Martin\Prepar3D v5\Shaders folder)
Delete your shader cache and restart the sim (Delete the files in your C:\Users\USERNAME\AppData\Local\Lockheed Martin\Prepar3D v5\Shaders folder)
- Tue Dec 14, 2021 7:48 am
- Forum: Screenshot Showcase
- Topic: Screen shots using my 10 years old system with recently upgraded graphic card system
- Replies: 1
- Views: 17814
Re: Screen shots using my 10 years old system with recently upgraded graphic card system
Nice shots!
The first four pictures, is this Cote Azur in France?
What scenery do you use?
I could imagine, in a strong winter to have snow in the mountains behind, but never at the beach. Is there something wrong with textures?
Regards
Dan
The first four pictures, is this Cote Azur in France?
What scenery do you use?
I could imagine, in a strong winter to have snow in the mountains behind, but never at the beach. Is there something wrong with textures?
Regards
Dan
- Mon Dec 13, 2021 7:39 am
- Forum: Prepar3D Client Application Questions
- Topic: Sun Reflections on Water broken
- Replies: 2
- Views: 3189
- Sat Dec 11, 2021 4:25 pm
- Forum: Hardware Specific Questions
- Topic: RTX 3080
- Replies: 16
- Views: 15373
Re: RTX 3080
I just installed a Gigabyte RTX 3080 in my computer and I'm wondering if its necessary to reinstall P3Dv4.5 to take full advantage of the graphics. This card replaced a Gigabyte RTX 1080. Jerry Yes, install the NVidia driver but don´t delete your prepar3d.cfg. Instead it is important to delete the ...
- Tue Dec 07, 2021 10:16 pm
- Forum: Prepar3D Client Application Questions
- Topic: CTD when selecting "motion blur"
- Replies: 8
- Views: 6280
Re: CTD when selecting "motion blur"
P.S. The tip with the aircraft was right. I started with default flight and F-35. Motionblur activated, everything fine. Change to a freeware Lookheed Neptune, no problem. Then I choose the Ctrl Ezy IA-58 Pucara and the sim crashed. I have to add here, I modified the model, so it is not clear if the...
- Tue Dec 07, 2021 9:41 pm
- Forum: Prepar3D Client Application Questions
- Topic: CTD when selecting "motion blur"
- Replies: 8
- Views: 6280
Re: CTD when selecting "motion blur"
Hi Dan, Most likely different aircraft won't have any impact on this, it's mainly to rule out specific add-ons. If you run the "Delete generated files" shortcut in the Prepar3D installation directory it will force configuration files to be regenerated from scratch. This is a good starting...
- Tue Dec 07, 2021 9:04 pm
- Forum: Prepar3D Client Application Questions
- Topic: CTD when selecting "motion blur"
- Replies: 8
- Views: 6280
Re: CTD when selecting "motion blur"
Hello, Are you seeing this on a clean installation? Does it happen with all aircraft? Motion blur will add a blur effect around objects that is mainly visible when quickly moving the camera. Regards, Rob McCarthy Hi Thanks for your answer. Unfortunately, I have not set up a vanilla system to test a...
- Tue Dec 07, 2021 10:58 am
- Forum: Miscellaneous
- Topic: Reporting Scenery Errors in Ecuador P3D5.2 HF1
- Replies: 11
- Views: 11014
Re: Reporting Scenery Errors in Ecuador P3D5.3
There´s one more discovered today
S2° 8.53' W80° 46.07'
I´ll update my patch.
S2° 8.53' W80° 46.07'
I´ll update my patch.
- Tue Dec 07, 2021 10:21 am
- Forum: Prepar3D Client Application Questions
- Topic: CTD when selecting "motion blur"
- Replies: 8
- Views: 6280
Re: CTD when selecting "motion blur"
It would be very nice, if LM staff could explain here, what maybe conflicting with the "Motionblur" setting. I never had a GUI setting causing a CTD before. So please, what does it change, what are the hardware demands for this? Do you other users use it? Does it work or crash the sim? Wha...
- Sat Dec 04, 2021 7:20 pm
- Forum: Prepar3D Client Application Questions
- Topic: CTD when selecting "motion blur"
- Replies: 8
- Views: 6280
Re: CTD when selecting "motion blur"
Also DSR disabled, Motionblur leads to black screen, hourglas for 2 seconds, then desktop. I got a protocol this time Anwendung: Prepar3D.exe Frameworkversion: v4.0.30319 Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet. Ausnahmeinformationen: Ausnahmecode c0000005, Ausn...