MNFRED JAHN'S DC3 C47 FOR P3D

Other problems or issues not covered by other troubleshooting topics.
bullfox
Posts: 95
Joined: Mon Jul 19, 2021 1:18 am
Location: Oregon, USA

Re: MNFRED JAHN'S DC3 C47 FOR P3D

Post by bullfox »

I just looked at my earlier post. I was the one who forgot the decimal point. You can also reduce the parasitic drag, but parasitic drag gets much worse as airspeed goes up so would not be much of a problem taking off. You can also increase engine efficiency. The more changes you make the further you can get away from actual flight performance. Be sure you keep a copy of the original config file in case you want to go back to the original.
 Ryzen 7 5800X3D liquid cooled, over clocked on auto to 4.5 ghz, XFX 6900XT Black, 2 tb M2 drive, 32 gb ddr4 ram, Asus Hero Crosshair VIII mother board running P3D6.19 in Win 10
shermank
Posts: 336
Joined: Thu Nov 28, 2013 6:17 pm

Re: MNFRED JAHN'S DC3 C47 FOR P3D

Post by shermank »

Big difference…thanks for the update
👏👏👏🥂🥂🥂

Sherm
Post Reply